User's Guide — 101Handheld (#4060) and Desktop (#44060)To Set “Fractional Resolution”:[Conv] [Stor] (Prefs) (1st press of [Stor]) FRAC 0-1/16 INCH[+] (plus sign) FRAC 0-1/32 INCH[+] FRAC 0-1/64 INCH[+] FRAC 0-1/2 INCH[+] FRAC 0-1/4 INCH[+] FRAC 0-1/8 INCHTo Set “Area” Answer Format:[Stor] (2nd press of [Stor]) AREA Std.[+] (plus sign) AREA 0. SQ FEET[+] AREA 0. SQ YD[+] AREA 0. SQ MTo Set “Volume” Answer Format:[Stor] (3rd press of [Stor]) VOL Std.[+] (plus sign) VOL 0. CU YD[+] VOL 0. CU FEET[+] VOL 0. CU MTo Set Rake Wall Stud Sizes to “Descending” or “Ascending”:[Stor] (4th press of [Stor]) RAKE dESCEnd[+] (plus sign) RAKE ASCEndTo Set Jack Rafter to “Descending” or “Ascending”:[Stor] (5th press of [Stor]) JACK dESCEnd[+] (plus sign) JACK ASCEndTo Set Regular/Irregular “Jack Spacing”:[Stor] (6th press of [Stor]) IRJK OC-OC[+] (plus sign) IRJK JAC-JACTo Set Fraction Resolution to “Standard” or “Constant”:[Stor] (7th press of [Stor]) FRAC Std.[+] (plus sign) FRAC COnStTo Set “Exponential Mode” On or Off:[Stor] (8th press of [Stor]) EXP OFF[+] (plus sign) EXP On(Cont’d)
