36 — CONSTRUCTION MASTER PROPAPERLESS TAPE OPERATIONNote: Not available on DT (Desktop) Printer—Model #44065.The Paperless Tape allows you to display and review the last twentyentries of a regular math or basic dimensional math string calculation.To access this mode after entering values, press [Rcl] [=]. Then, press[+] or [–] to scroll forward or backward through the entries.While in the Paperless Tape mode, the display will show the previouslyentered or calculated value, along with the sequence number of entry(e.g., 01, 02, 03, etc.) and the math operator (+, –, x, ÷, %) in the up-per left corner of the display.˛˛ Note: If [=] has been used in the middle of a string, SUB (for Subto-tal) will display in the upper left. If [=] was the last operation per-formed, the display will show TTL (Total) as the last entry.To exit this mode, press [=] to exit and maintain the last entry on thedisplay. When exiting, the last entry (or TTL) will be displayed, allowingyou to continue using the last tape value for another operation, if de-sired.˛˛ Note: The Paperless Tape is cleared when:−− [On/C] is pressed twice;−− upon a new calculation (new equation string is started); or−− when the calculator is shut off.
