96 — CONSTRUCTION MASTER PROAPPENDIX B — PREFERENCE SETTINGSThe Construction Master Pro calculators have Preference Settings thatallow you to customize or set desired dimensional formats and calcula-tions. The options vary per model.˛˛ Note: * = Default Setting or the setting calculator defaults to uponperforming an All Clear [Conv] [x].Preference Options1) Fractional Resolution −− *1/16 (displays fractional values to the nearest 16th ofan inch)−− 1/64 (*Default for Trig Plus III)−− 1/32−− 1/64−− 1/2−− 1/4−− 1/82) Area Display Format(n/a for Metric Mode) −− *Standard (if units entered are the same—e.g., feet x feet—the answer will remain in this format(sq. ft), but if units entered are different —e.g., inchesx feet—area answer will bedisplayed in square feet)−− Square Feet (area answers always displayed in sq.ft, regardless of unit entry—e.g.,inches x inches = sq. ft)−− Square Yards (area answers always displayed insq. yards—e.g., feet x feet = sq. yds)−− Square Meters (area answers alwaysdisplayed in sq. meters—e.g.,feet x feet = sq. meters)(Cont’d)˛˛ Note: To check the current Fractional Resolution, press [Rcl] [/]. Ei-ther “Std” (standard fractional resolution) or “Cnst” (constant) will bedisplayed, along with the fractional resolution).
