Calculated Industries MACHINIST CALC PRO User Manual

U ser 's GUide — 11gd radius — Enters or calculates a Radius. Unitlessentries assumed millimeters in Metric mode;Inches in U.S. mode. Calculates Radius givenentered Diameter.g8 Alpha — Enters alphabet character selection mode.While in this mode, a letter can be selected andused with D to enter a letter Drill Size. Enteringthis mode with a unitless entry between 1 and 26will display the corresponding letter of the alphabet(i.e. 5g8 displays the letter e). While in Alphamode, presses of 8 or + toggle forward through thealphabet, while presses of - toggle backward.a Adjacent — Enters or calculates the Adjacent(horizontal) leg of a right triangle. CalculatesAdjacent value given two other right-trianglevalues. Also enters the Center x-coordinate of aBolt Pattern.p Opposite — Enters or calculates the Opposite(vertical) leg or height of a right triangle. CalculatesOpposite value given two other right-triangle values.Also enters the Center y-coordinate of a Bolt Pattern.h hypotenuse — Enters or calculates the Hypotenuse(diagonal) of a right triangle. Calculates Hypotenusevalue given two other right-triangle values.n Angle — Enters or calculates an Angle, providingthe Adjacent Angle for both instances. Calculatesan Angle given two other right-triangle values. Alsoenters the Starting Angle of the first hole of a BoltPattern, with 0° being the three o’clock position andthe rotation going counterclockwise.