User Manual – Rev AY AMETEK Programmable PowerMX Series 95HARMONICS/TRACE ANALYSIS Screen [3Pi controller only]The fourth measurement screen is dedicated to the advanced measurements available on theMX Series with 3Pi controller only. This screen is not available on the P controllers. TheHarmonics/Trace Analysis measurement screen is a true menu screen offering several useraccessible fields. These fields are used to select the desired acquisition trigger and displaymode. The actual data is displayed whenever the ENTER key is pressed while the cursor is onthe VIEW or START field. The following fields are available on this menu:Figure 4-10: HARMONICS/TRACE ANALYSIS ScreenEntry DescriptionFUNCTION Selects Voltage, Current or Both parameters for display.VIEW Available display modes are TABLE, BAR and TRACE.TABLE mode: Displays the first 50 harmonics in atabular text format.BAR mode: Displays the first 50 harmonics in agraphical bar chart display.TRACE mode: Displays the selected Function in atime domain (waveform) graphicaldisplay.
