CamRanger CamRanger User Manual

Also see for CamRanger: User manual User manual User manual User manual

CamRanger CamRanger User Manual Manual pdf 4 page image

CamRanger HardwareThe CamRanger device is turned on by slidingthe power switch, located on the side of theunit, towards the front of the device. Thegreen power light will illuminate when the unitis powered on. Any switch on the oppositeside of the power switch does not currentlyhave any func5onality.The charging port is located next to the powerswitch. The male micro B end of the providedwhite charging cord is connected to this port.The other end of the charging cord can beconnected to a female USB port that provides power, such as a computer or through theprovided AC adapter.When the device is charging an addiLonal yellow light will illuminate next to the green powerlight indicaLng that it is charging. The yellow light will turn off leaving only the green power lightwhen it is fully charged.A black neoprene case is provided to assist in aOaching and securing the CamRanger. The casehas a carabineer to facilitate hanging from a tripod, belt loop, etc. Do not just hang theCamRanger by the cable as it will put strain on the USB connectors as well as possiblydisconnect.The CamRanger baOery is accessible by removing the boOom cover.The boOom cover is the side with the CamRanger serial number. Simply grasp the side edge/corner of the cover near the USB connector and pull back to remove. To replace the cover, firstplace the two lower tabs into the slots and then snap in the top.CamRanger is not water-resistant in any way and should not get wet.© CamRanger – Patent Pending 4