Cannon C60DP Use And Installation Instructions

Also see for Professional 60: Use and Installation Instructions User instructions

Contents

ELECTRICAL CONNECTIONWarning - THIS APPLIANCE MUST BE EARTHEDThe cooker must be connected by a qualified electrician to a suitable double - polecontrol unit with a minimum rating of 32A and a minimum contact clearance of 3mm,which should be fitted adjacent to (but not above) the cooker, in accordance with IEEregulations.The power supply cable should conform to BS6004 with a conductor size of 4mm 2.The control unit should be easily accessible in the event of an emergency.This appliance conforms to EN55014 regarding suppression of radio and televisioninterference.Access to the cooker terminals is by un-clipping the cover. The mains cable must passthrough the cable clamp and the screws must be fully tightened.Sufficient cable should be used to allow the cooker to be pulled out forservicing. Ensure that the cover is fully closed and secure afterwards.Take care not to trap the mains cable when pushing the cooker into its final position.38

/ 40

Related manuals for Cannon Professional 60