Cannon Professional 60 C60GP Use And Installation Instructions

Contents

8OVEN TIMER OPERATIONSETTING THE TIME OF DAYStep 1 Make sure all oven controls are turned Off.Step 2 Check the electricity supply to the cooker is turned on.Step 3 When switched on the display will show 0.00 and the Auto symbol,flashing intermittently.Step 4 Press & hold in both the Cook Period & End Time buttons together.Step 5 With the Cook Period & End Time buttons still held in, press either the “+”or “–” buttons to set the correct time of day.Step 6 Release all the buttons simultaneously.THE TIME OF DAY IS NOW SET.To change the time of day repeat Steps 4, 5 & 6 above.Note: You cannot adjust the time of day if the timer has been set for anAuto Cooking Programme.SETTING THE MINUTE MINDERStep 1 Ensure the time of day is set correctly.Step 2 Press and hold the Minute Minder button.Step 3 With the Minute Minder button held in, set the required Minute Minderperiod using the “+” and “–” buttons. A ‘bell’ symbol will light up.Release all buttons and the timer display will revert back to the time of day.The ‘bell’ symbol will remain lit to signify that a Minute Minder period has beenset.At the end of the set time an audible tone will be heard, and the ‘bell’ symbol willdisappear.Step 4 To cancel the audible tone press the Minute Minder button.Note 1 When the Minute Minder has been set, the time remaining can be checked at anytime by simply pressing the Minute Minder button.Note 2 If necessary the Minute Minder can be cancelled before the tone sounds bypressing and holding the Minute Minder button and then at the same timepressing the “–” button until 0.00 appears in the display window.