113Using a Memory CardERecording Motion JPEG Movies on a Memory CardYou can record Motion JPEG movies with the camcorder, from a tape in the camcorder( 114), or from devices connected via the AV terminal (analog line-in) or the DVterminal ( 114).❍ Do not turn off the camcorder, disconnect the power source or remove thememory card while the card access display (<<< or >>>) in the upper rightcorner of the screen or the card access indicator is flashing. Doing so couldresult in data damage.❍ When you are using a SD Memory Card, make sure that the protect switch isset to allow recording.❍ Do not load/unload a cassette during recording.❍ Make sure to insert a memory card with enough remaining capacity.❍ The sound of a movie recorded on a memory card will be monaural.Recording with the Camcorder1. Set the camcorder to CARD CAMERA mode.2. Press the start/stop button to begin recording.You can record up to 10 seconds in 320 × 240 and up to 30seconds in 160 × 120.3. Press the start/stop button to stop recording.The camcorder starts writing the movie on the memory card.To use the self-timer ( 68), press the (self-timer) button before step 2 andpress the start/stop button.CARD PLAY (VCR)CARD CAMERAPLAY (VCR)CAMERA
