15Masteringthe BasicsEUsing a Household Power SourceYou can operate the camcorder from a household power source using the suppliedpower adapter. The power adapter converts current from a power outlet (100-240 VAC, 50/60 Hz) to the DC current used by the camcorder.1. Turn the POWER switch to OFF.2. Connect the power cord to thepower adapter.3. Plug the power cord into a poweroutlet.4. Connect the power adapter to thecamcorder’s DC IN terminal.5. After use, turn off the camcorder and disconnect the power adapterfrom the camcorder. Unplug the power cord from the power outlet anddisconnect it from the adapter.❍ Turn off the camcorder before connecting or disconnecting the power adapter.❍ If the adapter is used close to a TV, it may cause picture interference. Move theadapter away from the TV or the antenna cable.❍ Do not connect any products that are not expressly recommended to thecamcorder’s DC IN terminal or to the power adapter.❍ You may hear some noise from the power adapter during use. This is not amalfunction.qwer