136 Using a Memory CardECreating a Start-up ImageYou can create a start-up image using a still image on the memory card or a samplestart-up image provided on the DIGITAL VIDEO SOLUTION DISK and save it as [MYIMAGE1] or [MY IMAGE2].❍ Make sure to insert a memory card with enough remaining capacity.❍ Before you create a start-up image, you need to record a still image on thememory card.❍ Retain the original data of the still image you have set as the start-up image onyour computer or removable disk.PreparationsRecord a still image on the memory card.ORUpload a still image from your computer to the memory card using thesoftware in the DIGITAL VIDEO SOLUTION DISK.For instruction on how to upload a still image to the memory card, refer to Adding StillImages from Your Computer to the Memory Card in the DIGITAL VIDEO SOLUTION DISKSoftware Instruction Manual.Setting the Still Image as Start-up Image1. Open the menu.2. Select [MY CAMERA].3. Select [CREATE START-UP IMAGE].[SET THIS AS START-UP IMAGE1?], [YES] and [NO] appears.4. Select a still image with the CARD +/– buttons and select [YES].[SAVE AS MY IMAGE1], [MY IMAGE2] and [CANCEL] appears.5. Select [MY IMAGE1].[OVERWRITE MY IMAGE1?], [YES] and [NO] appears.6. Select [YES].• The still image will be saved, and the image that was saved to [MY IMAGE1] is erased.• Select this image as start-up image following the procedure in Customizing theCamcorder ( 49).CARD PLAY (VCR)CARD CAMERAPLAY (VCR)CAMERACREATE START–UP IMAGEMY CAMERA( 43)
