194wPrinting4 Set the printing effects.Set as necessary. If you need not setany printing effects, go to step 5.Turn the <5> dial to select the itemon the upper right, then press <0>.If the <e> icon is displayed next to<z>, you can also adjust theprinting effect (p.196).Next, turn the <5> dial to select thedesired printing effect, then press<0>.* The screen display may differ depending on the printer.* When you change the printing effects, it is reflected in the image displayedon the upper left. Note that the printed image might look slightly differentfrom the displayed image which is only an approximation. This alsoapplies to [Brightness] and [Adjust levels] on page 196.Printing Effect DescriptionEOnThe image will be printed according to the printer’s standardcolors. The image’s Exif data is used to make automaticcorrections.EOff Same as the printing characteristics turned “On”. No automaticcorrection will be performed.EVIVID The image will be printed with higher saturation to producemore vivid blues and greens.ENR The image noise is reduced before printing.0 B/W Prints in black-and-white with true blacks.0 Cool tone Prints in black-and-white with cool, bluish blacks.0 Warm tone Prints in black-and-white with warm, yellowish blacks.zNatural Prints the image in the actual colors and contrast. No automaticcolor adjustments are applied.zNatural MThe printing characteristics are the same as the “Natural”setting. However, this setting enables finer printing adjustmentsthan with “Natural.”EDefault The printing will differ depending on the printer. For details, seethe printer’s instruction manual.COPY
