95E: Selecting the AF ModeSuited for still subjects. When youpress the shutter button halfway, thecamera will focus only once.When focus is achieved, the AF pointwhich achieved focus will flash in red,and the focus confirmation light <o>in the viewfinder will also light.With evaluative metering, theexposure setting will be set at thesame time focus is achieved.While you hold down the shutterbutton halfway, the focus will belocked. You can then recompose theshot if desired.AF is also possible by pressing the<p> button.One-Shot AF for Still SubjectsFocus confirmation lightAF pointIf focus cannot be achieved, the focus confirmation light <o> in theviewfinder will blink. If this occurs, a picture cannot be taken even if theshutter button is pressed completely. Recompose the picture and try tofocus again. Or see “When Autofocus Fails” (p.100).If the [2 Beep] menu is set to [Off], the beeper will not sound whenfocus is achieved (p.52).Focus LockAfter achieving focus with One-Shot AF, you can lock the focus on a subjectand recompose the shot. This is called “focus lock.” This is convenient whenyou want to focus a subject not covered by the Area AF frame.COPY
