1-10Testing the fax _________________________________After you have assembled the fax, loaded the paper, and installed the BJ cartridge, you can makesure the fax is printing properly by making several copies of a document (see p. 4-1).If you have problems printing, see Chapter 9.6 Align the slot in the cartridge with the yellow post in the fax, and with the label facingoutwards, insert the BJ cartridge into the cartridge holder. Lower the cartridge lock leveruntil you hear a click to lock the cartridge in place.The yellow post (BJ cartridge guide) should be visible through the slot. The BJ cartridge tilts slightly tothe left before lowering the cartridge lock lever.7 Close the printer cover.If the AUTO TEST PRINT setting is set to ON:The fax automatically prints a test page every time you insert a BJ cartridge.You can turn off automatic test printing by changing the AUTO TEST PRINT setting. See SYSTEMSETTINGS, p. 8-5.• Do not try to manually move or stop the cartridge holder.• Do not touch the components shown below or any metal parts.Ribboncable Guide railRound shaft Circuit board
