6-9RECEIVING DOCUMENTS6Telecom FaxAbility (New Zealand only)Telecom N.Z. offers the FaxAbility capability. If you subscribe to this service, your line isassigned two numbers: one for fax and one for phone. When the fax number is called, thenetwork sends a specific ringing tone which your fax recognizes and automatically handles as afax call. If the phone number is called, a different ringing tone is sent out from the network sothat the call is handled as a voice call. This means that there is no switching delay at the otherparty’s end.Contact Telecom for connection information.Setting the fax for network switch ____________Operation for network switch system _________The procedures for using the network switch system are almost the same as when using the faxover a normal telephone line. When you receive calls, however, the fax will respond slightlydifferently as described below.When you hear the telephone call ring pattern:Pick up the handset and talk normally. If you hear a slow beep, it means the call is from a faxmachine trying to send a document. Press [Start/Copy] to receive the document. If you do notpick up the handset, the fax continues to ring until the other party hangs up. If an answeringmachine is connected*, it takes over the call.* FAX-B820/B822 only.When you hear the fax call ring pattern (double ring):After the fax rings, it receives the document automatically.1 Press [Receive Mode] to select NET SWITCH.See Setting the receive mode, p. 6-2.Press [Start/Copy].The fax returns to standby mode.
