8-8Activity report __________________________________Summarizes the information for the sending and receiving activities of your fax after 20transactions. For automatic printing, see ACTIVITY REPORT, p. 8-3.Transactions in an activity report are listed chronologically.One-touch speed dialing list ___________________Lists the numbers and names registered under one-touch speed dialing buttons.Coded speed dialing list _______________________Lists the numbers and names registered under coded speed dialing codes.User’s data list _________________________________Lists the current settings of the fax and the registered sender information.List of documents in memory__________________Lists the documents currently stored in the fax’s memory (see p. 5-14).TX (Transmission) report ______________________Normally the fax does not print an activity report for transmitting, but you can set the fax to printan activity report every time you send a document. See TX REPORT, p. 8-3.You can set the fax to print an activity report only when an error occurs during transmitting. SeeTX REPORT, p. 8-3.RX (Reception) report __________________________Normally the fax does not print an activity report for receiving, but you can set the fax to printan activity report every time you receive a document. See RX REPORT, p. 8-3.You can set the fax to print an activity report only when an error occurs during receiving. SeeRX REPORT, p. 8-3.Multi TX/RX (Transaction) report ______________Lists the result of a sequential broadcasting.If you set the fax to print a TX REPORT and then use sequential broadcasting, a MULTI TX/RXREPORT will be printed instead of a TX (Transmission) REPORT. See TX REPORT, p. 8-3.A memory clear report is printed automatically when power is restored after a power failure. SeeMemory clear report, p. 9-18.
