8-2USER SETTINGSName Description SettingsDATE & TIME Set the date and time (24-hour clock) using the numericbuttons.–UNIT TELEPHONE # Enter your fax number using the numeric buttons. –UNIT NAME This is the name that appears at the top of each fax page yousend (see p. 2-8).–TX TERMINAL ID This option sets the parameters for the identification headerthat appears on every page you send.ON/OFFTTI POSITION Select the position of the TTI. INSIDE IMAGE/OUTSIDE IMAGEFAX/TELTELEPHONE # MARK Select the icon for the fax number.SCAN CONTRAST Set the density of the reproduction. STANDARD/DARKER/ LIGHTEROFFHOOK ALARM Enable/disable the off hook alarm. The alarm alerts you thatthe handset is not seated properly in its cradle.ON/OFFVOLUME CONTROL Set the volume of the fax sounds. –LINE MONITOR VOL Set the volume of the line monitor (sound during dialing). 0 (off)/1/2/3ALARM VOLUME Set the volume of the error alarm sound. 0 (off)/1/2/3KEYPAD VOLUME Set the volume of the keypad. 0 (off)/1/2/3RX CALL LEVEL Set the ring tone. STANDARD/HIGHTEL LINE TYPE Set the dialing method the fax uses to match the type of phoneline you have.TOUCH TONE/ROTARY PULSER-KEY SETTING Set the type of connection for your fax. PSTN/PBXPSTN Your fax is connected to an outside line. –PBX ACCESS TYPE: Set the access line type for the PBX. PREFIX/HOOKINGACCESS NUMBER: If you select PREFIX, you can enter anoutside line number of up to 19 digits.–AUTO VOICE DIAL Enable/disable automatic dialing for UCanTalk. ON/OFF
