press Enter.10. At the printer Helps and Hints menu, press F7.11. At the printer Edit menu, press F7.12. At the Select Printer menu, the BJ-200e driver is highlighted; type1 to select the driver.13. Choose 7 to initialize the printer.14. At the Print Option menu, make sure the selected printer is BJ-200e. Then press F7 to save all selections.Setting Up Other Software ApplicationsIf you are not using Windows, follow the guidelines in this section forsetting up our applications for use with the Bubble Jet Printer BJ-200e.If you installed the Canon BJ-200e Windows printer driver as describedin the previous section and will be printing only under Windows, you canignore this information.Software applications are designed to work with specific hardwaresetups. Most Application programs include an installation program orroutine that you run to identify the type of hardware you are using, suchas your computer and printer. When you tell your application programwhat printer you are using, it installs a program, called a printer driver,that supports your printer.Selecting a Printer DriverThe installation programs for most applications offer a list of printerdrivers form which to choose. If you find Canon BJ-200e, BJ-200, BJ-10e, or BJ-10ex on the list, select it. This will give you the fullest rangeof features.If you do not find one of these printers on the list, you can select aprinter that will have nearly the same operating capabilities as the BubbleJet Printer BJ-200e.To use the printer in BJ-10 mode, select one of the following printers(they are listed in order of preference):NOTE: Software developers continuously create printer drivers. If yourapplication software doesn't not list a Canon BJ-200e driver, call yoursoftware application's technical support line and ask if a BJ-200e driveris available. If they are unable to assist you, call the Canon help desk tosee if a driver is available.