Canon BJ-200e User Manual
                                                                                      | |
Contents
| 
DIP Switch SettingsThe DIP switch settings control various printer functions, such as thepage length and character set you want to use. The printer functionsdefined by the DIP switches are determined by the printer control mode.DIP switch 11 selects the printer control mode. When DIP switch 11 isOFF, the printer is in BJ-10 mode. When DIP switch 11 is ON, theprinter is in Epson LQ mode.BJ-10 ModeWhen the printer is in BJ-10 mode (DIP switch 11 is OFF), you can setthe DIP switches to control the following functions:Horizontal margins Left margin = 0Right margin = maximum print widthPrint direction (text) Bi-directionalFont typeface CourierHorizontal print position LetterText scale mode DisabledEnvelope mode DisabledReduction mode DisabledPage length 11 inchesCharacter set Character Set 1Automatic line feed (LF) Disabled (no automatic LF after CR)Alternate Graphics Mode DisabledCode page 437 (IBM USA)Buffer Input = Approx. 50.4 KBDownload = 0 KBPrinter control mode BJ-10Automatic emulation switching mode DisabledNOTE: This printer has two printer control modes: BJ-10 mode,which emulates the IBM Proprinter X24E, and Epson LQ mode, whichemulates the Epson LQ-510. The default setting is BJ-10 mode. If youchange this to Epson LQ mode, the default settings also change. |
Related manuals for Canon BJ-200
manualsdatabase
Your AI-powered manual search engine