When you are ready to print on transparencies, open yourdocument withing your software application and define anyspecial print options you can from within your print driver.For example, if you are using Windows, you can specifythe Paper Size, Media Type, Paper Source, Print Selection,and Print Quality from within the printer driver.Once your software and driver are ready to print, you canset up the printer for auto feed or manual feed. Bothmethods are described earlier in this chapter.Follow these guidelines when automatically feeding stacksof special paper.ß When automatically feeding transparencies, remove each sheetafter it is delivered. Do not allow transparencies to stack up inpaper output tray.ß Let the printed transparencies dry completely before storing them. The completedrying time required for Canon's transparencies is approximately 15 minutes.ß When a transparency has dried completely, cover its printed side with a sheet ofplain (not coated) paper before stroing it; this is recommended even if you placethe transparency in a clear file.Printing on EnvelopesYou can stack up to 15 envelopes in the sheet feeder or youcan manually feed envelopes one at a time.
