To start the Demo Prints, follow these steps:1. Press the POWER button to turn off the printer.2. To start Demo Print 1: press and hold the ON LINEbutton, and press the POWER button until the beepersounds twice.ß The two beeps are approximately threeseconds apart.ß The printer starts to print Demo Print 1.3. To start Demo Print 2: press and hold the ON LINEbutton, and press the POWER button until the beepersounds three times.ß The first two beeps are approximately threeseconds apart. The next beep is one secondlater.ß The printer starts to print the Demo Print 2.StoppingTo stop printing the Demo Print, press and hold the ONLINE button for one second. The printer stops printing,ejects the current sheet of paper, and goes back on-line.Demo print 1 looks like this:Demo Print 2 is similar to Demo Print 1 but shows theadvantages of Smoothing mode. In Smoothing mode, thejagged edges and ragged stair-stepping curves of charactersand graphics are polished and refined.Pausing a Print OperationWhen the ON LINE light is on, the printer is on-line andready to receive data from your computer. At this time, youcan send print data from your computer to the printer.While you are printing a document, you may want to pausethe printer.Follow these steps:1. To pause printing while the printer is working, press theON LINE button.
