Canon BJC-80 User Manual

Also see for BJC-80: Specification Service manual

Contents

Canon BJC-80 User Manual Manual pdf 101 page image

Software RequirementsTo use IrDA successfully, make sure the following conditions are satisfied:Use Windows 95Make sure the Microsoft IR Comm Driver (infrared driver) Ver. 2.0 hasbeen installed.Make sure a COM port has been selected for IrDA with the PrinterWizard.Make sure the BJC-80 is selected as the default printer via the BJC-80printer driver (Ver. 3.91 or later).The IrDA interface cannot detect the printer status and reset the printer. If communicationbetween the printer and computer is interrupted and the print Note job is aborted, the printer isinitialized automatically. The print job is cleared and paper is ejected.The software required to use the IrDA interface (Microsoft IR Comm DriverVer. 2.0) should already be installed on your computer. If it is not, you canobtain the driver as follows:1. Contact either Microsoft or Canon on the World Wide Web.2. Contact Canon’s BBS.3.*Note: This is how the customer's manual will read. In order to get the driver, becauseit is a Microsoft product, they will have to obtain the driver from the Microsoft WebSite. The customer can go to www.microsoft.com or www.ccsi.canon.com and followour link there.Reception RangeThe following conditions may reduce the reception range of the IrDA interfaceand cause the printer to start printing abnormal characters or images:If another IrDA device is attached.In another infrared device, like a set of wireless headphones or a remotecontroller, for example, is broadcasting in the same area.If the IrDA port is exposed to sunlight, fluorescent light, or any otherstrong light source like a large torch.If the IrDA port is not clean. (Clean it with a soft, dry cloth.)and other numbers.Call Canon to order a diskette. See page 1-5 for Canon’s Web address1 of 2 4/24/98 4:10 PM

/ 101

Related manuals for Canon BJC-80