Canon BJC-80 User Manual

Also see for BJC-80: Specification Service manual

Contents

Canon BJC-80 User Manual Manual pdf 28 page image

Paper GuidelinesWhen selecting or loading paper, please remember the following:Attempting to print on damp, curled, wrinkled, or torn paper can causepaper jams and poor print quality.Use cut-sheet paper only. You cannot use multipart paper.When using graph paper, the lines may not match because the 1/6 inchline spacing of the printer is slightly less than that of graph paper.If the print density of your page is very high, light paper stock may curlslightly due to the large amount of ink. If you need to print densegraphics, try printing on heavier stock.Do not use thicker paper that meets the specifications for this printer.Printing with a paper that is thick enough to come in contact with theprint head nozzles may damage the BJ cartridge.Loading PaperYou can stack paper in the sheet feeder to load it automatically, or you canmanually feed one sheet at a time. The path that the paper travels through theprinter is the same for automatic and manual feeding.You can place approximately 30 sheets of plain paper (20 lb or 5 g/m) in thesheet feeder at a time.You can stack approximately 10 sheets of transparencies or back print film inthe sheet feeder. However, these special media may not advance correctly underusual environmental conditions (such as extreme temperatures and humidity). Ifyou have trouble with special papers becoming skewed or feeding multiplesheets, do not stack them in the sheet feeder. Load them one sheet at a time.Place at least one sheet of plain paper in back of a stack of transparencies or back print film.1 of 1 4/24/98 3:05 PM