Auto Feed GuidelinesWhen automatically feeding stacks of paper, follow these guidelines:Do not open the front cover while printing. This may cause paper jams,smudges, or malfunctions.Do not leave paper stacked in the printer for long periods of times; longersheets of paper may become bent or curled over time. This may cause thepaper to misfeed or jam.If your printed page contains lots of graphics, the ink on the page may bedamp due to the print density. Remove the page right away and allow theink to dry.To reduce paper jams, remove each sheet as it is printed.The platen (the flat black plate inside the printer) may become inked ifyour print data beyond the width of the page. If this happens, clean theplaten. (For details on cleaning the platen, see Chapter 4, Maintaining thePrinter.)Do not try to load paper into the sheet feeder beyond the capacity of thepaper guide; stacking too much paper may cause paper jams or printingproblems.Make sure there are no gaps between the stack of paper and the paperguide nor the right edge of the sheet feeder.1 of 1 4/24/98 3:05 PM
