124Automated Playback (Slide Show)Slide show image settings are based on DPOF standards (p. 134).Starting a Slide ShowAll images or a selection of images on a CF card can be displayed one-by-one in anautomated slide show.1 In the [ (Replay)] menu, select [SlideShow] and press the button.See Selecting Menus and Settings (p. 42).2 Press the C or D arrow on the omniselector to select [Program]. Press the Bor A arrow to select between [All Images]or any one of slide [Show 1]-[Show 3].3 Press the C or D arrow on the omni selectorto select [Start] and press the button.• The slide show will start and automatically stop when the show is done.Pausing and Resuming a Slide Show• Press the button to pause the show. Press it again to resume.Fast Forward / Rewinding a Slide Show• Turn the main dial or use the B or A arrow on the omni selector to move tothe previous or next image.Stopping a Slide Show• Press the button during a slide show to stop it and display the slideshow menu.4 When the slide show is over, press the button.The slide show menu appears again. Press the button again to closethe menu.All Images Plays all the images on the CF card in orderSlide Show 1 - 3 Plays the images selected for each show in order.
