92Changing the ISO SpeedRaise the ISO speed when shooting in dark places or when you want to shoot witha faster shutter speed. You can choose from the following speeds: Auto, 50, 100,200 and 400.1 Press the button to turn the LCD monitor on.2 Press the button.3 Select * (LCD monitor) or * (Display Panel)using the C or D arrow on the omniselector.* The current setting is displayed.The ISO speed setting menu appears on the LCDmonitor.4 Select the desired setting using the maindial or the B or A arrow on the omniselector.You can shoot the image right after selecting settings by pressing the shutterbutton. This screen will appear again, once the image is shot.5 Press the button or click the main dial.6 Shoot the image.○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○• Higher ISO speeds increase the image noise. To take clean images, use as low anISO speed as possible.• Although the AUTO setting selects the optimal speed, it will automatically raisethe speed when the shooting conditions limits are reached. It will also raise thespeed when the light from the flash is insufficient to illuminate the subject matter.○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○Some settings are not available with certain Shooting modes. Please refer toFunctions Available in Each Shooting Mode (p. 208).
