Canon D1300 Series Service Manual

88 8-178-17Service Mode > COPIER > OPTION > BODYService Mode > COPIER > OPTION > BODYOPTION■ BODYCOPIER > OPTION > BODYLOCALE Setting of locationDetails To set the location.At installation in areas other than Japan, perform the following procedureto match the setting information with that of the location.Use case • At installation• When changing the location informationAdj/set/operate method 1) Enter the setting value under LOCALE, and then press OK key.2) Set the paper size configuration under SIZE-LC.3) Execute COPIER> FUNCTION> CLEAR> ALL.4) Turn OFF/ON the main power switch.Caution Since COPIER> FUNCTION> CLEAR> ALL is executed when changingthe location, the setting information of user mode, service mode, etc. isinitialized.The setting information of this item is not initialized.Display/adj/set range 1 to 81: Japan, 2: North America, 3: Korea, 4: China, 5: Taiwan, 6: Europe, 7:Asia, 8: OceaniaDefault value 1Related service mode COPIER> FUNCTION> CLEAR> ALLCOPIER> OPTION> BODY> SIZE-LCSIZE-LC Setting of paper size configurationDetails To set the paper size configuration.At installation in areas other than Japan, perform the following procedureto match the setting information with that of the location.Use case • At installation• Upon user’s requestAdj/set/operate method 1) Set the location under LOCALE.2) Enter the setting value under SIZE-LC, and then press OK key.3) Execute COPIER> FUNCTION> CLEAR> ALL.4) Turn OFF/ON the main power switch.Caution Since COPIER> FUNCTION> CLEAR> ALL is executed when changingthe location, the setting information of user mode, service mode, etc. isinitialized.The setting information of this item is not initialized.Display/adj/set range 1 to 41: AB configuration, 2: Inch configuration, 3: A configuration, 4: AB/InchconfigurationRelated service mode COPIER> FUNCTION> CLEAR> ALLCOPIER> OPTION> BODY> LOCALECOPIER > OPTION > BODYNS-CMD5 Setting of CRAM-MD5 authentication method at SMTP authenticationDetails To restrict use of CRAM-MD5 authentication method at the time ofSMTP authentication.When 1 is set, CRAM-MD5 authentication method is not used.Use case Upon user’s requestAdj/set/operate method 1) Enter the setting value, and then press OK key.2) Turn OFF/ON the main power switch.Display/adj/set range 0 to 10: Used (SMTP server-dependent), 1: Not usedDefault value 0Supplement/memo SMTP authentication: Protocol in which user authentication function isadded to SMTP, which is the protocol to be used for e-mail transmission.At the time of e-mail transmission, this protocol executes authenticationof the user account and the password between the SMTP server andthe user to approve e-mail transmission only when it’s authenticated.NS-PLN Setting of plaintext authentication at SMTP authenticationDetails To restrict use of PLAIN/LOGIN authentication, which is plaintextauthentication, at the time of SMTP authentication under theenvironment where the communication packet is not encrypted.When 1 is set, plaintext authentication is not used.Use case Upon user’s requestAdj/set/operate method 1) Enter the setting value, and then press OK key.2) Turn OFF/ON the main power switch.Display/adj/set range 0 to 10: Used (SMTP server-dependent), 1: Not usedDefault value 0Supplement/memo SMTP authentication: Protocol in which user authentication function isadded to SMTP, which is the protocol to be used for e-mail transmission.At the time of e-mail transmission, this protocol executes authenticationof the user account and the password between the SMTP server andthe user to approve e-mail transmission only when it’s authenticated.NS-LGN Setting of LOGIN authentication at SMTP authenticationDetails To restrict use of LOGIN authentication at the time of SMTPauthentication.When 1 is set, LOGIN authentication is not used.Use case Upon user’s requestAdj/set/operate method 1) Enter the setting value, and then press OK key.2) Turn OFF/ON the main power switch.Display/adj/set range 0 to 10: Used (SMTP server-dependent), 1: Not usedDefault value 0Supplement/memo SMTP authentication: Protocol in which user authentication function isadded to SMTP, which is the protocol to be used for e-mail transmission.At the time of e-mail transmission, this protocol executes authenticationof the user account and the password between the SMTP server andthe user to approve e-mail transmission only when it’s authenticated.