26Recording Still ImagesTo change the operating mode, refer to About the Operating Modes ( 11).1. Open the LCD panel and the lenscover (move the lens cover switchdown to ).2. Press halfway.Once the focus is automatically adjusted,will turn green and one or more AFframes appear.3. Press fully.The DISC access indicator will flash asthe image is being recorded.Avoid the following actions while the disc access display appears and whilethe DISC access indicator is on or flashing. Failing to do so may result inpermanent data loss.- Do not subject the camcorder to vibrations or strong impacts.- Do not open the disc cover and do not remove the disc.- Do not disconnect the power source or turn off the camcorder.- Do not change the operating mode.If the subject is not suitable for autofocus, turns yellow. Keeppressed halfway and adjust the focus manually with the multi selector ( ).To use the still images functions, you will need to set [STILL IMAGES] to [ON]beforehand ( 11).Start/StopStart/StopStart/Stop
