30Viewing Still ImagesTo use the still images functions, you will need to set [STILL IMAGES] to [ON] beforehand( 11).To change the operating mode, refer to About the Operating Modes ( 11).Use the multi selector ( ) to movebetween images. The following may not be displayed correctly.- Images not recorded with this camcorder.- Images edited on or uploaded from a computer.- Images whose file names have been changed. Avoid the following actions while the DISC access indicator is on or flashing.Failing to do so may result in permanent data loss.- Do not subject the camcorder to vibrations or strong impacts.- Do not open the disc cover and do not remove the disc.- Do not disconnect the power source or turn off the camcorder.- Do not change the operating mode.Slideshow1. Press .2. Select ( ) [ SLIDESHOW] and press ( ) .3. Select ( ) [START] and press ( ) .• Images are played back one after another.• Press to stop the slideshow.Index Screen1. Move the zoom lever toward W.The stills index screen appears with the first six still images.2. Select ( , ) an image.• Move the cursor to the image you want to view.• Press or to move to the next or previous index page.3. Move the zoom lever toward T.The index screen closes and the selected image is displayed.( 37) SLIDESHOWMulti selectorFUNC.FUNC.+ –
