64External ConnectionsConnecting to a TV and VCRPlaying Back on a TV ScreenSelecting the Type of TVTo change the operating mode, refer to About the Operating Modes ( 11).Before connecting the camcorder, select the [TV TYPE] setting according to the TV set towhich you will connect the camcorder - [WIDE TV]: TV sets with 16:9 aspect ratio or[NORMAL TV]: TV sets with 4:3 aspect ratio ( 37).Connection Diagram1. Turn off all devices before starting the connections.2. Connect the STV-250N Stereo Video Cable to the camcorder’s AVterminal and the terminals on the TV or VCR.Connect the white plug to the white audio terminal L (left), the red plug to the red audioterminal R (right) and the yellow plug to the yellow VIDEO terminal.3. On a TV: Set the input selector to VIDEO. On a VCR: Set the inputselector to LINE (IN). We recommend powering the camcorder using the compact power adapter. TV sets compatible with the Video ID-1 system will automatically switch to theappropriate aspect ratio. Otherwise, change the aspect ratio of the TVmanually.VIDEOAUDIORLINPUTSTV-250N StereoVideo Cable(Supplied)Open the terminal coverSignal flow
