Canon DR-2020OU User Manual

Contents

29Scanner SettingsConfigure various scan settings, such as the scanning method anddocument size.[Scan First] and [Select Scan Job] share the same scanner settingitems.IMPORTANTScanner settings include the basic settings found in the [Scannersetting] dialog box (or [Scanner setting] tab), and the advancedsettings found in the driver settings screen. Setting configurationsfrom the driver settings screen are used for all settings not found inthe basic settings.Basic Scanner SettingsConfigure the basic setting items for the scanner.Configurations from the driver settings screen are used for settingitems that are not included in the basic settings.● [Color mode]Select from the following modes for scanning documents.[24-bit color]: Scans the document in color.[Grayscale]: Scans the document in grayscale.[Black and White]: Scans the document in black-and-white (binary).● [Page Size]Specify the page size of documents.When [Auto size detect] is specified, the scanner detects the pagesize of the document, and the image is saved in the detected size.● [Orientation]Specify the orientation in which documents are fed into the scanner(portrait or landscape).This setting can only be configured when a page size that can befed horizontally through the scanner is selected for [Page Size].● [Dots per inch]Specify the scanning resolution.● [Scanning Side]Specify whether to scan only one side of a document or both sides.If you select [Skip blank page] and a blank page is detected withinthe document while scanning, the blank page is skipped.Documents placed in the feeder are scanned. If there are nodocuments in the feeder, the flatbed is scanned.● [Deskew]When a document is scanned at an angle, the slant is detected andstraightened out in the scanned image.● [Text orientation recognition]The orientation of text in scanned images is detected, and theimages are rotated to match the orientation of the text.[Scan First]If you select [Scan First], you canconfigure scanner settings beforescanning begins.[Select Scan Job]If you select [Select Scan Job], youcan configure scanner settings foreach job.