Canon DR-5010C Startup Manual

Contents

16 Installing the ScannerInstalling the ScannerInstallation RequirementsIn order to use the DR-5010C, your computer must satisfy the followingsystem requirements:• A computer that meets the following specifications:- CPU: Pentium 4 (1.5 GHz or higher)- Memory: 512 MB or more (1 GB or more recommended)- Hard disk: 1 GB or more available space- CD-ROM drive- SCSI board or Hi-Speed USB 2.0 interface- Monitor: Resolution of 1024 x 768 (XGA) or better recommended• SCSI board or USB 2.0 interface board that supports the scanner (See“Interface Cards,” on p. 19.)• Hi-Speed 2.0 interface equipped with your PC or Hi-Speed 2.0 interfaceboard compatible with your scanner• One of the following operating systems:Connecting via SCSI- Microsoft Windows 98 SE- Microsoft Windows Me- Microsoft Windows NT 4.0 Workstation SP6- Microsoft Windows 2000 Professional SP3 or later- Microsoft Windows XP Professional SP1 or later- Microsoft Windows XP Home Edition SP1 or laterConnecting via USB 2.0- Microsoft Windows 98 SE- Microsoft Windows Me- Microsoft Windows 2000 Professional SP3 or later- Microsoft Windows XP Professional SP1 or later- Microsoft Windows XP Home Edition SP1 or later• ISIS compatible or TWAIN compatible application software that runs onyour operating systemIMPORTANT• USB connection is not supported on Windows NT. Connect the scanner viaa SCSI cable to use it with a Windows NT system.• If the Hi-Speed USB 2.0 interface is standard equipment on your computer,then all computer operations are not guaranteed. If the standard Hi-SpeedUSB 2.0 interface does not operate normally sometimes, then use therecommended Hi-Speed USB 2.0 interface card. Contact your localauthorized Canon dealer or service representative for more detailedinformation.