Troubleshooting 83Cause The scanner’s SCSI ID is identical to the SCSI ID ofanother device.Remedy Check the SCSI IDs of all SCSI devices connected to the systemand set a unique SCSI ID for the scanner. (See p. 22.)Cause The terminator is not set correctly.Remedy Shut down both the PC and the scanner, and then turn the scannerON first, and then the PC. (See p. 25.)Cause There is a problem with another SCSI device that isconnected in the daisy chain.Remedy Do not use the daisy chain connection configuration. (See p. 22.)Cause The PC was turned ON before the scanner.Remedy Shut down both the PC and the scanner, and then turn the scannerON first, and then the PC. (See p. 25.)Cause The scanner is not ON.Remedy Refer to “The Scanner Does Not Turn ON,” on p. 81 and checkto see if the scanner is ON. If the scanner is not ON, shut downthe PC, then turn the scanner ON first, and then the PC.(See p. 25.)Cause The SCSI card is not compatible with the scanner.Remedy Use a recommended SCSI card. (See “SCSI Cards,” on p. 19)
