298With a PictBridge printer, you can easilyprint images with DPOF.1 Prepare to print. See page 286.Follow the “Connecting the Camera to the Printer” procedure up tostep 5.2 Under the [31] tab, select [Print order].3 Select [Print]. [Print] will be displayed only if the camera is connected to aprinter and printing is possible.4 Set the [Paper settings] (p.288). Set the printing effects (p.290) if necessary.5 Select [OK].W Direct Printing of Print-Ordered Images Before printing, be sure to set the paper size. Certain printers cannot imprint the file number. If [Bordered] is set, certain printers may imprint the date on the border. Depending on the printer, the date may appear faint if it is imprinted on abright background or on the border. Under [Adjust levels], [Manual] cannot be selected. If you stopped the printing and want to resume printing the remainingimages, select [Resume]. Note that printing will not resume if you stopthe printing and any of the following occurs:• Before resuming the printing, you changed the print order or deletedprint-ordered images.• When you set the index, you changed the paper setting beforeresuming the printing.• When you paused the printing, the card’s remaining capacity was low. If a problem occurs during printing, see page 294.
