Editing72E 1. Make sure you are in the DUB MODE menu.2. Select FADE IN, EFFECT or FADE OUT from the DUB MODEmenu.• Point the arrow at “FADE IN” and press the selector dial in.• Fade in settings appear.• Point the arrow at your desired setting and press the selector dial in again.• The display returns to DUB MODE menu.• Set “EFFECT” or “FADE OUT” in the same way.• If you choose not to set a fader or effect, move the arrow to DUBSTANDBY, and each of the options will be automatically set to OFF.• See also “Using Digital Effects” starting on p. 47 for more information ondigital effects.3. Move the arrow to DUB STANDBY.• WIND THE TAPES AND PAUSE \ SET appears in the display.4. Set the tape in the VCR to the point where you want to startrecording, set it to record pause mode.Set the tape in the camera to the point where you want to startdubbing, set the camera to playback pause mode.• You can use the `, 1, e/a and 3 buttons or special playbackfunctions in the same way as in playback mode.5. Press the selector dial in.• START ....... PRESS e/a TO START DUB appears in the display.• Now you are unable to use the wireless controller.6. Press e/a on the body of the camera.• Recording starts.• NOW DUBBING appears in the display.7. When you reach the end of the scene you want to record, presse/a on the body of the camera.• The camera returns to playback pause mode and the VCR automaticallyswitches to record pause mode.• The camera returns to the DUB MODE menu.• When you finish dubbing, press the MENU button. The camera returns toVCR mode.• If you set the zero set memory at the position on the tape where you want tostop dubbing, every time you return to that point, the camera will cancel itsdubbing and enter playback pause mode, and the VCR, record pause mode.Note:• To cancel during dubbing, push 3 on the body of the camera.Dubbing to a VCR