AdditionalInformation95ETroubleshootingCause and/or what to do about it• The camera is not switched on(p. 13, 22).• The cassette is not loaded or is set forerasure prevention (p. 11-12).• The tape has reached the end.• The battery pack is exhausted or notproperly attached (p. 8-10, 86).• The function cannot be used in thatrecording program (p. 44).• The camera was in record pausemode for more than about fiveminutes (p. 13).• The battery pack is exhausted(p. 9-10, 86).• The cassette is not loaded or is set forerasure prevention (p. 11-12).• The tape has reached the end.• The POWER switch is not set tocamera mode (p. 13).• You are attempting to play back orrecord from a copyright protectedcassette (p. 77).• The video heads are badlycontaminated (p. 92).• The camera is on manual focus(p. 60).• The viewfinder lens needs adjusting(p. 85).• The lens is dirty (p. 92).Refer to this checklist first if you have any problems with your camcorder.Possible explanations are given for each problem on the list — turn to the pagenumbers in parentheses for more information.Make sure that the camera is properly connected if you are using it with a TV orVCR. Consult your dealer or service outlet if problems persist.Recording/PlaybackProblem? Nothing happens when I press thebuttons.? The camera turned itself off.? The start/stop button doesn’twork.? There’s no picture in the display.? There’s a blank blue screen in thedisplay.? The camera won’t focus.