Canon Elura Elura Instruction Manual

Also see for 40MC - Elura MiniDV Digital Camcorder: Software guide Instruction manual Instruction manual Instruction manual Brochure

Contents

Canon Elura Elura Instruction Manual Manual pdf 75 page image

75EEditingSimple Editing to a VCR1. Find a point on your recorded cassette slightly before the sectionyou want to copy.2. Start to play it back while you monitor the picture on the TV.3. Start recording on the VCR as soon as the section you want to copyappears on the screen.4. Pause the VCR at the end of the section you want to copy, then stopplayback on the camera.5. Repeat steps 1 to 4 until your edited recording is complete.Note:• The quality of the edited tape will be slightly lower than that of the original.If you cannot find the appropriate remote control setting for the camcorder tocontrol your VCR, you still can edit a tape to the VCR as follows.1. Connect the camera to the VCR.• See “Connections for Playback on a TV Screen” on p. 25.2. Prepare the TV and VCR.• Turn on the TV and set it to the video channel, or set the TV/VIDEOselector to VIDEO.• Turn on the VCR, and set its input selector to LINE. Load a blank cassette,and put the VCR in record pause mode.• See your TV and VCR instruction manuals for details.3. Turn the camera’s POWER switch to VCR, and load your recordedcassette.The m REMOTE terminal allows youto connect the camera to equipment.Some buttons on editing equipmentmay operate differently from those onthe camera.To use the m REMOTE terminal,attach the optional Docking UnitDU-200 to the camera (p. 54).PreparationsBasic editingm REMOTE terminalREMOTE DC MICNotes:• m (LANC) is a trademark. It stands for Local Application Control Bus System.• We cannot guarantee the results when connecting to equipment not bearing theLANC m symbol.