44Playing telephone messagesTelephone messages will be played back in order from the oldest message recorded. If a voice memo has beenrecorded, it will be played back first.Follow the procedures below to delete all messages.Remote control featuresUse these features when you call home to play back any messages you may have received. You can also use theremote control features to set TAM MODE.You must register a four-digit PIN as your password before you can use these features (see below).Registering the password for remote control1 Press [Play].The day and time when the telephone message was recorded, the number of telephone messagesand the number of the message being played (ICM No.) are displayed whenever a message isplayed.• Press [ ] to listen to the message again. (Repeat)• Press [ ] to play the next message. (Skip)• Press [ ] twice to play the previous message.• Press [Stop] to stop playback.• Press [Delete] during playback to delete a message.• Use [ ] or [ ] to change the volume.1 Press [Delete], then press to delete all messages.• A voice memo is not deleted (see p. 43).• If you decide not to delete all messages, press [#].1 Press [Function], then press [Start/Copy].2 Use [ ] or [ ] to select TAM SETTINGS, then press [Start/Copy].3 Use [ ] or [ ] to select PASSWORD, then press [Start/Copy].4 Use the numeric buttons to enter a four-digit PIN as your password, then press [Start/Copy].5 Press [Stop].Registration ends and the fax returns to standby mode.SUN 17:15 02/05PASSWORD 1234
