System Settings 5-115Summary of Important SettingsSetting ItemsSettings DescriptionSYSTEM SETTINGSPASSWORDEnter the system password protecting the system settings.(You do not have to do this if the system settings are not yetpassword protected.) (See Chapter 4, “Restricting the Useof the Machine.”)1. SYS. ADMIN. INFO Set the System Administrator’s ID and password to protectthe system settings. You cannot set the SystemAdministrator's ID to 0.If you set the System Administrator’s ID to ‘0’, theregistered System Administrator’s ID is deleted.1. SYS. ADMIN. ID 1-99999992. SYSTEM PASSWORD 1-99999993. E-MAIL ADDRESS Up to 60 characters (See the Sending Guide.)2. DEPT.ID MANAGEMNT Set restrictions for sending and printing with DepartmentIDs and passwords. (See Chapter 4, “Restricting the Useof the Machine.”)OFF* Department ID management function is turned ‘OFF’.ON Department ID management function is turned ‘ON’. Sethow the use of the machine will be restricted.1. DEPT. ID ENTRY Set the Department ID number from 00 to 99, and enter theDepartment ID from 1 to 9999999. You cannot set theDepartment ID and password to 0.1. PASSWORD 1-99999992. COPY LIMITS 0-9999993. TX LIMITS 0-9999994. SELECT SENDER Select one of the registered sender names to be used asTX terminal ID for the documents sent by the department.For details about registering the sender names, seeChapter 1, “Before You Start Using This Machine,” in theFacsimile Guide.2. COUNT MANAGEMENT Enables you to manage the counter.1. COUNT INFORMATION Display the counter information for each department.1. PRINT COUNT Display the counter information about the printing jobs.2. SEND COUNT Display the counter information about the sending jobs.2. COUNT RESET1. ON*Reset the counter.Reset the counter.2. OFF Cancel resetting the counter.An asterisk (*) indicates the default setting.
