Connecting to a Printer78: The image selection screenappears.FROM THE IMAGE SELECTION SCREEN1 Select ( ) the still image youwant to mark with a transfer order.2 Press ( ) to set the transfer order.A checkmark appears in the boxnext to the transfer order symbol .Press ( ) again to cancel thetransfer order.3 Repeat steps 1-2 to mark additionalimages with transfer orders orpress twice to close themenu.Erasing All Transfer OrdersConnecting to a PrinterPrinting Still Images – Direct PrintThe camcorder can be connected to anyPictBridge compatible printer. You can markthe still images you want to print and set thedesired number of copies as a print order( 81).Canon printers: SELPHY printers of the CP,DS and ES series and inkjet printers markedwith the PictBridge logo.Connecting the Camcorder to the Printer1 Insert the memory card containingthe still images you want to print.2 Turn on the printer.3 Connect the camcorder to theprinter using the USB connection–connection type ( 74)– shownin the previous section PCConnection Diagrams.• appears and changes to .• The (print/share) button lightsup and the current print settings will bedisplayed for approx. 6 seconds.IMPORTANTIf continues to flash (for more than 1minute) or if does not appear, the camcorderis not correctly connected to the printer. In suchcase, disconnect the USB cable and turn off thecamcorder and the printer. After a short while,turn them on again, set the camcorder tomode and restore the connection.NOTESwill appear for images that cannot beprinted.FUNC.( 21)TRANSFER ORDERPress ( )( 8)FUNC.( 21)MENUCARD OPERATIONSTRANS.ORD.ALL ERASEYESFUNC.FUNC.FUNC.FUNC.Connecting to a Printer( 8)1COPY
