xv• Do not install the machine in the following locations:- A damp or dusty location- A location near water faucets or water- A location exposed to direct sunlight- A location subject to high temperatures- A location near open flames- A location near devices that contain magnets or generate magnetic fields, such asspeakers• Avoid poorly ventilated locations.During use, the machine generates ozone. However, the amount of ozone generatedis not enough to affect the human body. Nevertheless, if the machine is used for aprolonged period of time in a poorly ventilated room, or when making a large quantityof prints, be sure to ventilate the room to make the working environment ascomfortable as possible.• Make sure the machine is approximately 4" (10 cm) away from walls and otherequipment for proper ventilation.• Make sure the location is not affected by extreme temperature changes, and alwaysstays between 50°F and 90.5°F (10°C and 32.5°C).• Make sure the relative humidity of the area is between 20% and 80%.• Do not use or store the machine outdoors.Power SupplyWARNING• Do not damage or modify the power cord. Also, do not place heavy objects on thepower cord, or pull on or excessively bend it, as this could cause electrical damageand result in a fire or electrical shock.• Keep the power cord away from a heat source; failure to do this may cause the powercord coating to melt, resulting in a fire or electrical shock.• Do not connect or disconnect the power cord with wet hands, as this may result inelectrical shock.• Do not connect the power cord to a multiplug power strip, as this may cause a fire orelectrical shock.• Do not bundle up or tie the power cord in a knot, as this may result in a fire orelectrical shock.• Insert the power plug completely into the power outlet, as failure to do so may resultin a fire or electrical shock.• Do not use power cords other than the power cord provided, as this may result in afire or electrical shock.• As a general rule, do not use extension cords. Using an extension cord may result ina fire or electrical shock. If an extension cord must be used, however, use one ratedfor voltages of 120 V AC and over, untie the cord binding, and insert the power plugcompletely into the extension cord outlet to ensure a firm connection between thepower cord and the extension cord.