Making Copies5-2Copying5Making CopiesNOTE• When making copies on LTR-size paper after having continuously copied on papersmaller than LTR-size paper, the copies may be dirty. To prevent copies from being dirty,wait about 1 minute before making copies.• When making copies of a small size or heavy paper*, etc., the copy speed may beslightly slower than usual.* The paper type should be selected in the Menu. (See “Specifying the Paper Type,” on p.2-11.)• If you intend to make a copy and print with a thermal transfer printer using the samesheet of paper, make the copy first. Failure to do so may make copies dirty or cause apaper jam.• When copying onto transparencies, remove each transparency from the output tray as itis output.1 Place the document on the platen glass or load it in the ADF.For details on how to place documents, see “Setting Up Documents,” on p. 3-3.2 Press [COPY].3 Use the numeric keys to enter the number of copies.You can set up to 99 copies.4 Adjust any necessary settings for your document.• Specify the size and the type of the paper you load in the cassette or themulti-purpose feeder. (See “Specifying the Paper Size and Type (Common forCassette and Multi-Purpose Feeder),” on p. 2-10.)• Press [Image Quality] to select the scanning resolution. (See “Adjusting the ImageQuality (Resolution),” on p. 5-6.)• Press [Exposure] to select the scanning exposure. (See “Adjusting the Exposure(Density),” on p. 5-6.)• Press [Enlarge / Reduce] to select the copy ratio. (See “Setting Enlarging/Reducing,”on p. 5-4.)• Press [Collate / 2on1] to perform the collate copy or 2 on 1 copy function. (See“Special Features,” on p. 5-8.)
