Paper Drawers7-6Routine Maintenance7IMPORTANT• Paper which has been rolled or curled must be straightened out prior to use.• Make sure that the height of the paper stack does not exceed the loading limit mark( ) at the back of the paper drawer and the corners are below the paper sizeguide clips.• Be sure to set the paper-size detecting lever correctly. If the lever is set to thewrong position, paper jams or dirty prints may occur, or the inside of the machinemay get dirty.NOTE• Each paper drawer holds about 250 sheets of paper (20 lb bond (80 g/m2 )).• If there are instructions on the package of paper about which side of the paper toload, follow those instructions.• When the paper is loaded into the paper drawer, the side facing up is the oneprinted on.• If problems occur, such as poor print quality or paper jams, try turning the paperstack over, and reload it.• For more information on the print direction of preprinted paper (paper which haslogos or patterns already printed on it), see "Relationship between OriginalOrientation and Preprinted Paper Output Chart," on p. 9-11.5 Gently push the paper drawer back into the machine until itclicks into space in the closed position.CAUTIONWhen returning the paper drawer to its original position, be careful not toget your fingers caught, as this may result in personal injury.IMPORTANTYou will not be able to make copies or prints if you load paper that exceeds theloading limit, or if the paper drawer is not completely pushed into the machine.Always check that the paper drawers are in place, and that the paper does notexceed the loading limit.
