Paper Drawers3-2Routine Maintenance3Paper DrawersThis section describes how to load paper into the paper drawers.NOTE• The following paper sizes can be loaded in Paper Drawers 1, 2, 3, and 4:- A4, A4R, A3, or A5• Paper Drawer 2 can be added by attaching the optional Cassette Feeding Module-J1 or-K1 .• Paper Drawer 3 (and 4) can be added by attaching the optional Cassette FeedingModule-K1.• For more information on available paper stock which can be loaded in the paper drawers,see “Available Paper Stock,” on p. 5-3.Loading PaperA message prompting you to load paper appears on the LCD display, and the errorindicator flashes red when:• paper runs out in any of the paper drawers.• a paper drawer is not fully inserted into the machine. Make sure that the paperdrawer is properly set in place.• a paper drawer is opened even if the paper is loaded.IMPORTANT• Do not load nonstandard paper sizes into the paper drawers.• Do not load the following types of paper into the paper drawers, as this may cause paperjams:- Severely curled or wrinkled paper- Lightweight straw paper: less than approximately 64 g/m2- Transparencies- Envelopes- LabelsDensity: AutoImgQual.: Text2-Sided: Off100% A4Load paper CAUTIONTake care not to cut your hands on theedges of the paper when loading it intothe machine.
