Canon IR3250 Reference Manual

Also see for IR3250: User guide Maintenance Guide Network guide

Contents

Report Settings4-44 Custom Fax SettingsReport SettingsYou can specify whether to print a Fax TX Report after every send job, only when an error occursduring transmission, or not at all. You can also specify whether a Communication Control Report(the history of Send/Receive jobs) is printed after every 100 documents sent or received, or printedat specified times. For a description of reports other than fax reports generated from AdditionalFunctions, see “Report Settings,” in the Reference Guide.Fax Send Result Report Settings (Fax TX Report)You can print a Fax Send Result Report after the completion of every send job. You can also selectto print a portion of the sent document on the Fax Send Result Report (Error Copy Print). The fac-tory setting is to print reports only when a sending error has occurred, but you can also select not toprint Send Result Reports at all.NOTE• The factory settings are:- Fax TX Report: For Error Only.- Error Copy Print (B&W Only): On1 Call up the desired screen as follows:key → [Report Settings] → [Settings] → [Fax TX Report]2 Select [For Error Only] or [Off]. If [For Error Only] is selectedGo to step 3. If [Off] is selectedPress the [OK] key and go to step 4.[For Error Only] Prints report after senderror only.[Off] Prints no reports.AdditionalFunctions