Canon IR3250 Reference Manual

Also see for IR3250: User guide Maintenance Guide Network guide

Contents

When Problems Occur5-45 TroubleshootingWhen Problems OccurFax Sending Problems If Unable to Send If Memory is Full During Sending Operation Vertical Streaks are Printed at the Recipient's End Image is Truncated at the Recipient’s EndVerify SolutionIs the phone line type setting correct? Verify the type of phone line to which the machine isconnected.Is original set correctly? Reset original and try again.Is the phone number stored in the one-touchbutton or the address book correct?Try again. Confirm the phone number stored in the one-touch button or the address book.Is the receiving machine out of paper? Ask recipient to add paper.Is the recipient line is busy? Use busy line detector.Verify SolutionIs the resolution set to 200 x 400 dpi or 400 x400 dpi? Is image setting set to Text/Photo?If original does not contain fine text or pictures, set reso-lution to standard and image setting to text.Are unnecessary documents being stored inmemory?Print incoming documents to remove them from memory,or repeat the procedure after documents scheduled forsending have been sent.Verify SolutionIs the recipient's paper size smaller than thesize of the original being sent?The machine automatically reduces the size to fit therecipient's paper size when the recipient's paper size istoo small.Verify SolutionIs original set in the correct direction? Reset original and try again.