Canon IR3250 Reference Manual

Also see for IR3250: User guide Maintenance Guide Network guide

Contents

Error Code Table5-25 TroubleshootingError Code TableWhen an error occurs, one of the following error codes is printed on the report. Please clear theerror by following the response(s) listed in the table.NOTE• If after following the responses in the table, errors cannot be cleared, contact your service representative.Error Code Cause Solution#003 Amount of data requires too much time tosend a one-page document.Send with reduced resolution.Too much time is required to receive a one-page document.Ask the recipient to reduce resolution orseparate the page into multiple pages.#005 No response from the recipient. Retry the entire procedure.Recipient may be using a machine otherthan a G3 machine.Ask recipient to make sure receivingmachine is a G3 machine.#012 Receiving machine is out of paper. Ask recipient to add paper.#018 No response after redialing. Unable to sendbecause recipient is busy or no fax tonewas returned.Check recipient status and try the proce-dure again from the beginning.#037 Memory is full. Delete or print documents saved in theMemory RX box.#080 Cannot send because the receivingmachine does not support subaddresses.Contact the recipient.#081 Cannot send because the receivingmachine does not support passwords.Contact the recipient.#102 Recipient’s subaddress or password iswrong.Contact the recipient.#995 Operation has been cleared for reservecommunication.If necessary, retry the entire procedure.