104Before UseBasic GuideAdvanced GuideCamera BasicsAuto Mode / HybridAuto ModeOther ShootingModesP ModePlayback ModeWi-Fi FunctionsSetting MenuAccessoriesAppendixIndexBefore UseBasic GuideAdvanced GuideCamera BasicsAuto Mode / HybridAuto ModeOther ShootingModesP ModePlayback ModeWi-Fi FunctionsSetting MenuAccessoriesAppendixIndex3 Establish the connection.zz Connect to the smartphone as described insteps 5 – 9 in “Connecting to WPS-Compatible Access Points” (=94 – 95)or steps 4 – 6 in “Connecting without anAccess Point” (=98 – 99).zz After a connection is established with thesmartphone, the smartphone nicknameis displayed on the camera. (This screenwill close in about one minute.)zz You can now use the smartphone toimport images from the camera. (Thecamera cannot be used to send imagesto the smartphone.)zz Use the smartphone to end theconnection; the camera will automaticallyturn off.zz From now on, you can simply press the<{> button to connect to the registeredsmartphone.• When you are in the vicinity of an access point that you havepreviously connected to, the camera will automatically connectto it in step 2. To change access points, select [Switch Network]from the screen that will be displayed when the connection isbeing established, and follow steps 5 – 9 in “Connecting to WPS-Compatible Access Points” (=94 – 95).• All images in the camera can be viewed from the connectedsmartphone. Note that if you have assigned the <{> button, [ViewSettings] (=109) is not available.• One smartphone can be registered to the <{> button. If you wish to register adifferent smartphone, clear the one currently registered (=105) first.Using the <{> ButtonOnce you have registered a smartphone or Image Sync (=106) tothe <{> button, you can connect to the registered destination simply bypressing the <{> button.Registering a Smartphone to the <{> ButtonOnce you have connected to a smartphone initially via Wi-Fi by pressing the<{> button, you can simply press the <{> button after that to connect againfor viewing and saving camera images on connected devices.1 Press the <{> button.2 Choose the destination.zz Press the <q><r> buttons to choose [{],and then press the <m> button.
