10Before UseBasic GuideAdvanced GuideCamera BasicsAuto Mode / HybridAuto ModeOther ShootingModesP ModePlayback ModeWi-Fi FunctionsSetting MenuAccessoriesAppendixIndexBefore UseBasic GuideAdvanced GuideCamera BasicsAuto Mode / HybridAuto ModeOther ShootingModesP ModePlayback ModeWi-Fi FunctionsSetting MenuAccessoriesAppendixIndexInitial PreparationsPrepare for shooting as follows.Attaching the Strapzz Thread the end of the strap through thestrap hole ( ), and then pull the otherend of the strap through the loop on thethreaded end ( ).Holding the Camerazz Place the strap around your wrist.zz When shooting, keep your arms close toyour body and hold the camera securelyto prevent it from moving. Do not restyour fingers on the flash.Charging the Battery PackBefore use, charge the battery pack with the included charger. Be sure tocharge the battery pack initially, because the camera is not sold with thebattery pack charged.1 Insert the battery pack.zz After aligning the marks on the batterypack and charger, insert the battery packby pushing it in ( ) and down ( ).2 Charge the battery pack.zz CB-2LF: Flip out the plug ( ) and plugthe charger into a power outlet ( ).zz CB-2LFE: Plug the power cord into thecharger, then plug the other end into apower outlet.zz The charging lamp turns orange, andcharging begins.zz When charging is finished, the lamp turnsgreen.3 Remove the battery pack.zz After unplugging the battery charger,remove the battery pack by pushing it in( ) and up ( ).CB-2LFECB-2LF
