124Before UseBasic GuideAdvanced GuideCamera BasicsAuto Mode / HybridAuto ModeOther ShootingModesP ModePlayback ModeWi-Fi FunctionsSetting MenuAccessoriesAppendixIndexBefore UseBasic GuideAdvanced GuideCamera BasicsAuto Mode / HybridAuto ModeOther ShootingModesP ModePlayback ModeWi-Fi FunctionsSetting MenuAccessoriesAppendixIndex• When the camera and TV are connected, you can also shoot while previewingshots on the larger screen of the TV. To shoot, follow the same steps as whenusing the camera screen. However, AF-Point Zoom (=37) is not available.Still Images MoviesPowering the Camera with Household PowerPowering the camera with AC Adapter Kit ACK-DC90 (sold separately)eliminates the need to monitor the remaining battery level.1 Make sure the camera is off.2 Open the cover.zz Follow step 1 in “Inserting the BatteryPack and Memory Card” (=11) toopen the memory card/battery cover, andthen open the coupler cable port coveras shown.3 Insert the coupler.zz Insert the coupler facing the directionshown, just as you would a battery pack(following step 2 in “Inserting the BatteryPack and Memory Card” (=11)).Terminalszz Make sure the coupler cable passesthrough the port.4 Close the cover.zz Lower the cover ( ) and hold it down asyou slide it, until it clicks into the closedposition ( ).5 Connect the power cord.zz Insert the adapter plug into the end of thecoupler cable.zz Insert one end of the power cord into thecompact power adapter, and then plugthe other end into a power outlet.zz Turn the camera on and use it as desired.zz When finished, turn the camera off andunplug the power cord from the outlet.• Do not disconnect the adapter or unplug the power cord whilethe camera is still on. This may erase your shots or damage thecamera.• Do not attach the adapter or adapter cord to other objects. Doing socould result in malfunction or damage to the product.Coupler Cable Port
